S-3: Difference between revisions

S-3 (view source)

49 bytes removed , 14 December 2008

18

edits

Revision as of 12:43, 14 December 2008 (view source) Randallw (talk \| contribs) No edit summary ← Older edit		Revision as of 12:45, 14 December 2008 (view source) Randallw (talk \| contribs) (→‎Differences between S3 and S3A) Newer edit →
Line 12:		Line 12:

	== Differences between S3 and S3A ==		== Differences between S3 and S3A ==
	The ~~S-3~~ sampling head has ~~been redesigned to improve~~ baseline shift due to cable flexing~~. The improvement is roughly ten-to-one~~. All specifications ~~on the S-3A remain the same as for~~ the ~~S-3~~. The major differences in design involves the gate board in the box part of the probe, but some changes are also made to the circuits in the body of the probe.		The S3A sampling head has a 10x improvement in baseline shift due to cable flexing. All other specifications are identical to the ordinary S3. The major differences in design involves the gate board in the box part of the probe, but some changes are also made to the circuits in the body of the probe.