S-3

From TekWiki
Revision as of 09:54, 14 December 2008 by Randallw (talk | contribs) (New page: The S3 sampling head is a plug-in head for use with the 7000 series sampling plug-ins or with the Type 3S2/3S5/3S6 samplers. The plug-in includes a permanently attached 1x probe with the s...)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

The S3 sampling head is a plug-in head for use with the 7000 series sampling plug-ins or with the Type 3S2/3S5/3S6 samplers. The plug-in includes a permanently attached 1x probe with the sampling bridge enclosed in the probe.

The S3 does not provide a trigger pickoff for internal triggering.

Input Characteristics

The probe tip input is equivalent to 100k resistor in parallel with about 2.3pF capacitance at low frequency.

An offset voltage of either +/- 1V or +/- 2V can be selected via a toggle switch on the front panel.

Retrieved from "https://w140.com/tekwiki/index.php?title=S-3&oldid=229"