TDS2022

From TekWiki
Jump to navigation Jump to search
Tektronix TDS2022
Digital Storage 200 MHz 2-channel scope
Tektronix TDS2022

Produced from 2005 to (?)

Manuals
Manuals – Specifications – Links – Pictures

The Tektronix TDS2022 is a dual-channel, 200 MHz, 1 GS/s digital scope with a color LCD screen.

An optional rear-mounted TDS2MEM Communication Module provides a CompactFlash card slot, GPIB, RS-232, and Centronics-type parallel printer interfaces.

The MATH MENU button provides waveform adjustments (CH1-CH2, CH2-CH1, CH1+CH2) along with FFT (spectrum, harmonics, distortion, noise, impulse, vibration) measurements. Measurements can also be performed for time (frequency) and voltage (amplitude). Repetitive signals can be captured and averaged to remove noise, or captured as a single-shot signal.

Triggering of signal capturing is available through a comprehensive TRIG MENU providing Edge (rising or falling), Video (NTSC, PAL, SECAM), and Pulse Width (or Glitch) triggering on CH1, CH2, Ext and AC Line sources.

Key Specifications

Bandwidth and Channels 200 MHz; Bandwidth is 20 MHz at 2 mV/div; 2 Channels
Vertical Sensitivity 2 mV to 5 V/div with calibrated fine adjustment
Time Base Range 2.5 ns to 50 s/div
Sample Rate 1.0 GS/s on each channel
Record Length 2.5 K points
Automatic Waveform Measurements Period, Frequency, +Width, -Width, Rise Time, Fall Time, Max, Min, Peak-to-Peak, Mean, Cycle RMS
Waveform Processing Operators (Add, Subtract, FFT); FFT (Windows: Hanning, Flat Top, Rectangular; 2048 sample points; Autoset Menu (Single-button, automatic setup of all channels for vertical, horizontal, and trigger systems with undo autoset)
Autoset Menu Square Wave (Single-cycle, Multi-cycle, Rising or Falling Edge); Sine Wave (Single-cycle, Multi-cycle, FFT Spectrum); Video (NTSC, PAL, SECAM) Field: All, Odd or Even Line:All or Selective Line Number

Pictures